 |
 |
 |
|
The patented ASL 1000 system is an innovative side lighting kit that combines Lunasee's LERtape and special 1W LEDpods to create solid rings of light on your wheels as the wheel rotates. The LERtape and LEDpods have been designed and engineered to maximize brightness and performance. This cutting edge visual effect is sure to turn heads and sure to make you more visible to other motorists on the road. Even better, all this is done without any wires or LEDs in or on your wheels.
The kit includes Lunsee's LERtape (4mm pin striping), 4 high powered 1W LEDpods, control box, switch, and versatile mounting hardware suitable for most poplular makes and models. Please refer to the FITMENT section for more details.
Color: Lunasee's LERtape pinstriping is a whitish color in daylight (only 4mm wide), and glows a greenish/white at night. This greenish color is the brightest and most visible to the human eye, particularly in the periphery. Other colors will be available in the future.
Included in the kit: - 4 x 1W high intensity LEDpods
- Controller
- Switch
- Fuse and Fuse Assembly
- Lunasee's LERtape pin stripe designed specifically for use with LEDpods
- Brackets and mounting hardware
- Zipties
- Spacers
Sold separately: We recommend you also purchase the LERtape Applicator Tool. This handy tool will make applying the LERtape easier and with consistent alignment.
How quick does the wheel light up? Watch and see.
PLEASE REVIEW FITMENT SECTION BEFORE PURCHASING!
Controller: The ASL 1000 system requires 0.4 amps (or 400ma) and a nominal 12V DC power supply. This Controller/LED Driver is necessary to drive the high power 1 Watt LEDpods.
LEDpods: Lunasee's LEDpods include high powered 1Watt LEDs, and the wavelength and beam angle are optimized for maximize brightness of the LERtape. These LEDpods are quite different from decorative LEDs and SMD's that are lower power and typically have wide beam angles to spread light over a wide area.
Caution: LEDs are in or near the ultraviolet spectrum. Never look directly at the light source
LERtape: Lunasee's fast reacting photoluminescent pin striping comes in a single roll that can be cut to length to fit each wheel. The material is 4mm in width and one roll is 6.5 meters in length. This is more than enough material to apply to the front wheel of your trike. The LERtape is specifically formulated for maximum performance with LEDpods.
Wheel Size Combination Rolls LERtape Required 2 x 16" 1 roll 2 x 17" 1 roll 19" and 16" 1 roll 21" and 16" 1 roll 23" and 16" 2 rolls
Mounting Hardware: The kit includes a variety of mounting hardware for installation on bikes with DUAL SWING ARMS. Please review the Fitment section for more details.
.
FITMENT The ASL 1000 Kit includes versatile mounting hardware for installation on most popular motorcycle makes and models with dual swing arms. We have installed or customers have installed the system on various brands, including Harley, Honda, Kawasaki, Suzuki, and Yamaha. If your bike has a single sided swing arm, please contact Lunasee for more information about fitment for your particular make/model.
We recommend you watch the Fitment Video or review the Fitment Guide. Both are available on the Support page.
If you have questions about fitment on your bike, please email techsupport@lunasee.com and let us know your make, model and year or call us at 252-353-4354 x2. We will be happy to assist.
Of course, you may also develop your own custom mounting solutions.
LERtape APPLICATION In addition, your rim will need a suitable surface area to apply the 4mm wide photoluminescent pin striping. While Lunasee's LERtape has unique photoluminescent properties, it is applied similar to any other wheel pin striping, and should work on most wheels/rims. In fact, we haven't found a wheel yet that would prevent application of the LERtape. We recommend purchasing the LERtape Applicator Tool to make tape application and alignment a breeze!
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
- 1 Watt High Power LEDs (not your typical decorative LED)
- LEDpods and LERtape specifically designed and engineered to maximize performance and brightness
- Minimal power consumption at 0.4 amps
- Solid rings of light create a unique cutting edge visual effect - sure to turn heads!
- "Light Signatures" created by these solid rings of light make you visible and recognizable to other motorists
- This is NOT reflective material - which only works in the direct path of headlights
- No wires or LEDs actually on your wheels - only a 4mm pin stripe
- Unlike other wheel lighting systems with LEDs actually mounted on your wheels, there is no need for a complex component to get power to LEDs on your wheels. The ASL 1000 Series is simple, durable and trouble free.
|
|
|
|
|
|
|
