ALL INCLUSIVE 1 WHEEL KIT - includes LunaGLO rim tape & Tape Applicator Tool!
Lunasee Pro 1000 Hi Viz Wheel Light Kit (1 Wheel)
- Top of the line wheel lighting kit including LunaGLO Rim Tape to create Lunasee Hi Viz Wheel Lighting system.
- The PRO 1000 1 Wheel Kit only contains LEDs and mounting hardware for installation on 1 wheel.
- Each LEDpod package utilizes a single high intensity 1-watt LED specifically designed for maximum charge of the LunaGLO rim tape. .
- The PRO 1000 LEDs have a rated life of approximately 25,000 hours.
- Low power required - 0.4 amps.
- Patented system
- Added visibility and safety
- Unique styling and cutting edge visual effect for your ride
- Allows motorists to quickly identify you as a motorcycle
- Unlike reflective components, this is active light and can be seen even outside beam of headlights
- Components are typically hidden away and not visible in daylight, except for the thin glow pin stripe, which is an off-white in day, and glows greenish/white at night
- No LEDs or wires actually on your wheels
- 2 x 1W high intensity LEDpods
- Controller (to drive high power LEDpods)
- Fuse and fuse assembly
- Brackets and mounting hardware
- Zipties, spacers, adhesives
- 1 roll of LunaGLO rim tape (4mm x 6.5m)
- 1 Tape Applicator Tool
- Installation Instructions
- 12V DC
- Power consumption - 0.4 amps
- Included Controller required to regulate power to the high power PRO 1000 LEDs
- High power 1W LEDs for maximum brightness
- Rated life of 25,000 hours
- Wavelength and beam angles specifically engineered for maximum glow of LunaGLO tape
LunaGLO rim tape
Lunasee's fast reacting high performance photoluminescent pin striping comes in a single roll that can be cut to length to fit each wheel. The material is 4mm in width and one roll is 6.5 meters in length. This is enough material to do both sides of two wheels for most factory sized wheels - so one roll is more than enough for one wheel applications.
See info below for estimated requirements for various wheel size combinations. The LunaGLO rim tape is specifically formulated for maximum performance with Lunasee's LEDpods.
Wheel Size Combination Rolls Required
2 x 16" 1 roll
2 x 17" 1 roll
19" and 16" 1 roll
21" and 16" 1 roll
23" and 16" 2 rolls
Note on Adhesion: The LunaGlo rim tape is designed for application on typical aluminum or painted aluminum rims. Rims that are powder coated or have teflon or other non-stick coating may impact ability of this material to adhere to your rim surface. Please contact Tech Support with any questions. Please refer to the Limited Warranty for more information on warranty.
Lunasee 1 Wheel Kits are generally used for installation on the front wheel only and are perfect for Trikes or other bikes where installation on the rear wheel(s) is not possible. The PRO 1000 1 Wheel Kit should work on any front wheel setup.
If you intend to install this on the rear wheel, we recommend you watch the Fitment Video or review the Fitment Guide. Both are available on the Support page.
If you have questions about fitment on your bike, please email firstname.lastname@example.org and let us know your make, model and year or call us at 252-353-4354 x2. We will be happy to assist.